How would I connect a 60 degree bend to another small end (male) fitting?

60 Degree bends have small ends, which we refer to these small ends as ''male'' therefore, you can connect two fittings together by using a female connection piece. By fittings we mean 90 degree bends, 45 degree bends, concentric reducers, T-pieces etc. These two parts would need to be secured together by using self-drill screws and duct sealant. Please see our ''How To'' video - How to connect spiral ducting.

What material is a 60 degree bend fabricated from?

All metal 60 degree bends listed on our shop are made out of galvanised steel. However, we are able to provide this in stainless steel. The most common grades of stainless steel are 304 and 316 grade, and these are made to order. Please contact the team to discuss your requirements further.

How do I fasten the duct work together?

For fastening without the need for any pre-drilled holes, we advise our customers to use self-drill screws. Once you have decided on a method of fastening the duct work together, you'll need a sealant. We would advise using duct sealant, which is a water-based sealant and will provide a permanent seal whilst withstanding a reasonable amount of vibration. You could also use cloth tape or foil duct tape. Please see our ''How To'' video - How to connect spiral ducting.

60 Degree Bend 355mm

£41.14 £49.37 inc VAT

In stock and ready for dispatch

Product Description

355mm diameter 60 degree set Galvanized steel bend

Radius r = 1 x D

Please call if you require any assistance or help choosing the correct products. Our aim is to ensure that your purchase goes smoothly and is delivered on time.

Please note: we may send out like for like products from different manufacturers.

You can call us on 01455 616 444 or email [email protected]

Visit our trade counter: Unit 3 Claymill Road, Leicester, LE4 9JJ. We are open from Monday to Thursday 8am till 5pm and Friday 8am till 3pm.

Customers rate our excellent service at 4.8 out of 5, based on 812 reviews.

Downloads

60 Degree Bend Datasheet 230KB

FAQ

How would I connect a 60 degree bend to another small end (male) fitting?: 60 Degree bends have small ends, which we refer to these small ends as ''male'' therefore, you can connect two fittings together by using a female connection piece. By fittings we mean 90 degree bends, 45 degree bends, concentric reducers, T-pieces etc. These two parts would need to be secured together by using self-drill screws and duct sealant. Please see our ''How To'' video - How to connect spiral ducting.
What material is a 60 degree bend fabricated from?: All metal 60 degree bends listed on our shop are made out of galvanised steel. However, we are able to provide this in stainless steel. The most common grades of stainless steel are 304 and 316 grade, and these are made to order. Please contact the team to discuss your requirements further.
How do I fasten the duct work together?: For fastening without the need for any pre-drilled holes, we advise our customers to use self-drill screws. Once you have decided on a method of fastening the duct work together, you'll need a sealant. We would advise using duct sealant, which is a water-based sealant and will provide a permanent seal whilst withstanding a reasonable amount of vibration. You could also use cloth tape or foil duct tape. Please see our ''How To'' video - How to connect spiral ducting.