£243.87 £292.64 inc VAT
In stock and ready for dispatch
Pneumatic Blast Gate dampers 150 diameter with Galvanised Steel Blade
1/8" 5/2 Solenoid/Spring Valve
Please select Solenoid AC voltage options above
1260.20.200 20 bore x 150 stroke cylinder
1/8" BSP SFE Steel Wool Silencer
We recommend these to be installed in a horizontal duct with the blade pointing upwards or downwards.
Please call if you require any assistance or help choosing the correct products. Our aim is to ensure that your purchase goes smoothly and is delivered on time.
Please note: we may send out like for like products from different manufacturers.
You can call us on 01455 616 444 or email [email protected]
Visit our trade counter: Unit 3 Claymill Road, Leicester, LE4 9JJ. We are open from Monday to Thursday 8am till 5pm and Friday 8am till 3pm.
Customers rate our excellent service at 4.8 out of 5, based on 926 reviews.
Pneumatic blast gate dampers are automated dampers that are used in dust extraction and ventilation systems to control the airflow within the system. Instead of manually operating the damper, the pneumatic dampers use compressed air and a pneumatic cylinder to automatically slide the gate open or closed.
A pneumatic blast gate damper is ideal for ducting that is difficult to access or where the blast gate dampers are installed too high for manual operation. It is also an excellent choice for systems that require automated operation.
We can offer these dampers in the following voltages:
We can also offer a manual pneumatic lever, which can be used to control a single pneumatic damper or to operate two dampers in sequence.
There is also a pneumatic controls kit, which is a solution for managing airflow in systems with more than one dampers. You can configure it to open one damper, whilst closing another, or to control multiple dmapers from a single point.
The body is made from die-cast aluminium, and the blade is typically zintec steel. If your system handles more aggressive or corrosive materials, there’s a 316 stainless steel blade option too.
Unfortunately we do not offer any dampers which can provide an airtight seal. The blast gate dampers are highly effective at closing off sections within the ductwork to divert maximum suction of active machines. There will be a percentage that can still leak through where the gate slides or around the blade.
We have a video explaining the process of installing a blast gate damper! Please click here to see the video.
