£194.44 £233.33 inc VAT
In stock and ready for dispatch
Standard Exhaust Hose 76mm Diameter 5 Meter Length - 000412-076-0100
Exhaust hose for exhaust fume temperatures up to +200°C, super lightweight, crush-resistant.
Material:
1 spiral: plastic-profile helix
2 wall: EPDM/PP-coated polyester fabric
Applications:
• suction of engine exhaust fumes up to max.+200 °C acc. to exhaust guidelines and sufficient fresh air intake (approx. 50%)
• permanently rollover-proof exhaust hose
• medium wear during extraction of petrol and diesel engine exhaust fumes
• all conventional exhaust systems, such as: - Exhaust Hose Reel - Suction Rail System - Upper/Lower Floor Systems - Stationary Systems
Properties:
• permanently rollover-proof
• high tension/tear-proof
• robust
• good flow characteristics
• tight bending radius
• extremely flexible
• withstands high mechanical loads
• excellent recovery properties
• super lightweight
Temperature Range:
• +200°C with appropriate use of exhaust regulators and sufficient air supply (approx. 50%)
Please call if you require any assistance or help choosing the correct products. Our aim is to ensure that your purchase goes smoothly and is delivered on time.
Please note: we may send out like for like products from different manufacturers.
You can call us on 01455 616 444 or email [email protected]
Visit our trade counter: Unit 3 Claymill Road, Leicester, LE4 9JJ. We are open from Monday to Thursday 8am till 5pm and Friday 8am till 3pm.
Customers rate our excellent service at 4.8 out of 5, based on 936 reviews.
The applications for the 326 are as follows:
• flexible hose/ ducting for hot gases
• vehicle gas exhaust system, car gas extraction: hose reel, slotted floor channel, underfloor extraction system
• engine test bench, exhaust gas measurement
This can vary depending on the diameter you are looking at, please see the datasheet in the downloads which will provide you the information you require.
The wall thickness of the 326 is 0.4mm approx.
The maximum length we keep as stock is 5 meters or 10 meters (please check the description) however, we are able to supply this in various lengths but this would be made to order with a longer lead time. Please contact us with your requirements and we will be able to assist further.
The hose is a special plastic-profile supporting spiral. The wall is fabric-reinforced tape; wall: EPDM/ PP coated fabric.
The exhaust gas temperatures for the 326 is up to 200°C *when correctly applied with exhaust gas funnels and sufficient fresh air supply (50% approx.).*
The 326 is crush-resistant, vibration resistant and has a good resistance to chemicals.
